Trend Micro Trend Cove & Edge Trim 8mm Rad (Tct Router Cutter Range / Radius)
Trend Cove & Edge Trim 8mm Rad (Tct Router Cutter Range / Radius) This time-saving cutter trims the edge & cuts a radius edge mould at the same time.
Free P&P
Trend Micro Trend Pierce & Trim 1.27mm X 123mm Ol (Tct Router Cutter Range / Laminate Trimmers)
Trend Pierce & Trim 1.27mm X 123mm Ol (Tct Router Cutter Range / Laminate Trimmers) Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops.
P&P included
Trend Micro Trend Pierce & Trim 12.7mm Dia (Tct Router Cutter Range / Laminate Trimmers)
Trend Pierce & Trim 12.7mm Dia (Tct Router Cutter Range / Laminate Trimmers) Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops.
P&P included
Trend Micro Trend Double Guided Trim/Prof 19.1X25.4 (Tct Router Cutter Range / Trimmers)
Trend Double Guided Trim/Prof 19.1X25.4 (Tct Router Cutter Range / Trimmers) Self guided trimmer with ball bearings, fitted to both shank and nose.
Free P&P
Trend Micro Trend Double Guided Trim/Prof 19.1X50mm (Tct Router Cutter Range / Trimmers)
Trend Double Guided Trim/Prof 19.1X50mm (Tct Router Cutter Range / Trimmers) Self guided trimmer with ball bearings, fitted to both shank and nose.
Free P&P
Trend Micro Trend Double Guided Trim/Prof 19.1X25.4 (Tct Router Cutter Range / Trimmers)
Self guided trimmer with ball bearings, fitted to both shank and nose. Allowing templates to be placed either on top or bottom of the material.
Free P&P
Trend Micro Trend Double Guided Trim/Prof 19.1X50mm (Tct Router Cutter Range / Trimmers)
Self guided trimmer with ball bearings, fitted to both shank and nose. Allowing templates to be placed either on top or bottom of the material.
Free P&P
Trend Micro Trend B/Guided Adjust Chamfer A=45 (Tct Router Cutter Range / Laminate Trimmers)
Trend B/Guided Adjust Chamfer A=45 (Tct Router Cutter Range / Laminate Trimmers) Adjustable trimmer will trim and bevel the top and bottom edges of the workpiece.
Free P&P
Trend Micro Trend Bevel Trim A=45 X 27mm Dia (Tct Router Cutter Range / Laminate Trimmers)
Trend Bevel Trim A=45 X 27mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard.
P&P included
Trend Micro Trend B/Guided Adjust Chamfer A= 65 (Tct Router Cutter Range / Laminate Trimmers)
Trend B/Guided Adjust Chamfer A= 65 (Tct Router Cutter Range / Laminate Trimmers) Adjustable trimmer will trim and bevel the top and bottom edges of the workpiece.
Free P&P
Trend Micro Trend Bevel Trim A=60 X 28mm Dia (Tct Router Cutter Range / Laminate Trimmers)
Trend Bevel Trim A=60 X 28mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 60 degrees. A 16mm bearing is supplied as standard.
P&P included
Trend Micro Trend Bevel Trim A=45 X 27mm Dia (Tct Router Cutter Range / Laminate Trimmers)
Trend Bevel Trim A=45 X 27mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard.
P&P included
Trend Micro Trend Bevel Trim A=80 X 20mm Dia (Tct Router Cutter Range / Laminate Trimmers)
Trend Bevel Trim A=80 X 20mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard.
P&P included
Trend Micro Trend Bevel Trim A=30 X 26mm Dia (Tct Router Cutter Range / Laminate Trimmers)
Trend Bevel Trim A=30 X 26mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 30 degrees. A 16mm bearing is supplied as standard.
P&P included
Trend Micro Trend Combi Trimmer A1=90 X A2=45 (Tct Router Cutter Range / Laminate Trimmers)
Trend Combi Trimmer A1=90 X A2=45 (Tct Router Cutter Range / Laminate Trimmers) Self-guided combination trimmer. 90 degree trim is obtained by engaging the bottom half. 45 ...
P&P included